Docman SNOMED Switch - Step 4: The Switch

Training Updated by Training

This is the final article in a series of four which support you in the process of switching from Read2 to SNOMED codes within your Docman system.

If you have not yet read the previous articles in this series, follow the links below.

This fourth article will guide you through the steps to make the switch from Read2 to SNOMED, once all the previous reporting, mapping and changes have been made.

The steps to complete the system switch to SNOMED can be completed, follow the steps here:

  1. From the Home page, select Settings
  2. From the Settings Console menu, select Organisation Settings
  3. From the Organisation Settings menu, select Integration
  4. In the Integration menu, select Clinical System
  5. In the field named Clinical Code Type, select the dropdown field and change to Snomed
  6. To save your changes, scroll to the bottom of the page and select the green Update button
If you have not Mark as 'signed off' on all manual mapped changes in step 3, Docman will prompt any outstanding sign off's that must be processed prior to the Clinical Code Type switch being updated.

Select Play to watch the steps as described above, the video below guides you through the steps to change the Clinical Code Type in your system.

Media Short

How did we do?

Contact