Docman SNOMED Switch - Step 1: Checks

Training Updated by Training

This is the first in a series of four articles which support you in the process of switching from using Read2 to SNOMED code set within your Docman system.

We will guide you through the system to check the clinical code set currently in use.

  1. From the Home page, select Settings
  2. From the Settings Console menu, select Organisation Settings
  3. From the Organisation Settings menu, select Integration
  4. In the Integration menu, select Clinical System
  5. In the field named Clinical Code Type, the text will either display Read2 or Snomed

At this stage, do NOT change the field to Snomed if this shows Read2. The following articles will support you through the process.

If the field displays Snomed, then no further action is required. However, if the field displays Read2 follow the instructions in the following articles to complete the switch.

Select Play to watch the steps as described above, the video below guides you through the steps to check the current code set enabled in your practice.

Media Short

Once you have watched the video, and you are ready to continue the process, follow the link below to the second article in the series.

How did we do?

Contact